New ANSI 121-Compliant Gear Keeper® retractable tape measure tethers can save a life.

New ANSI 121-Compliant Gear Keeper® retractable tape measure tethers can save a life.

Read More

New ANSI 121-Compliant Gear Keeper® retractable tape measure tethers can save a life.

New ANSI-121 compliant Deluxe Side-Release Wrist Lanyard for small hand tools up to 5 lbs.

The Gear Keeper® TL1-2007 offers worksite safety, increased productivity and fast change-out of tools. Gear Keeper’s new ANSI-121 compliant Deluxe TL1-2007 side release wrist lanyard system for tools up to 5 lbs. are particularly important when a short drop length […]

Read More

New ANSI-121 compliant Deluxe Side-Release Wrist Lanyard for small hand tools up to 5 lbs.

42-Inch Anchor Tether Creates Spacious 18-foot Diameter Work Area

Gear Keeper’s proprietary elastic core offers 250% stretch with stress-free extension. Gear Keeper’s new ergonomically constructed Super Coil anchored tool tethers are manufactured with a low-force polyurethane elastic core that is woven throughout the entire body of the webbing. The result […]

Read More

42-Inch Anchor Tether Creates Spacious 18-foot Diameter Work Area

Eight inexpensive ways to free up your hands when fighting fires

Gear Keeper’s Add-A-Clip™, is the easiest way to secure small tools exactly where you need them.   There’s no time to waste fumbling for their small, but critically important hand tools and accessories like gloves, scissors, knives and flashlights. The […]

Read More

Eight inexpensive ways to free up your hands when fighting fires

Tool interchangeability of two new, affordable wrist lanyards offer maximum worksite safety, increased productivity and ease of use.

Each of the new Gear Keeper® Deluxe Wrist Lanyard Systems can be used with many tools. A construction worker at heights, using a variety of hand tools drops a tool… and everyone below is in danger. A tool is inadvertently left […]

Read More

Tool interchangeability of two new, affordable wrist lanyards offer maximum worksite safety, increased productivity and ease of use.

Hang On To Your Hard Hat… There’s a new low-cost safety lanyard.

The new Gear Keeper© Standard Hard Hat Lanyard adds more safety for less than $8. Working at ground level, your hard hat protects you from an object falling from above. But when someone is working aloft, a falling hard hat […]

Read More

Hang On To Your Hard Hat… There’s a new low-cost safety lanyard.

Avoid dropped tools…How to attach lanyards to tools without attachment points.

New Gear Keeper® guide includes fully illustrated, 6-page section on how to tether seemingly un-tetherable tools. Even small tools that are dropped from above are serious safety hazards. When working at heights, some of the most commonly used tools, that […]

Read More

Avoid dropped tools…How to attach lanyards to tools without attachment points.

In close quarters or when climbing, retractable tether keeps heavy tools close to body.

Minimize dangling tool entanglement with new Gear Keeper® heavy-tool retractable tether. Gear Keeper’s new RT3-5605 heavy-tool retractable tether’s ultra low profile keeps tools close to the body when stored while still allowing complete accessibility when in use. The retractor employs […]

Read More

In close quarters or when climbing, retractable tether keeps heavy tools close to body.

New Anchored Tool Tethers Can Save Lives

New From Gear Keeper – 15-25-Pound Anchored Tethers Provide Safety and Security for Construction and Field Force Workers Hammerhead Industries, manufacturers of Gear Keeper industrial tool tethering systems, today announced a pair of new tool tethers for heavy tools and instruments. […]

Read More

New Anchored Tool Tethers Can Save Lives

Need To Secure Small Items? Twelve New, Small Tool Retractors From Gear Keeper©.

These small tool retractors let you pull the tool out, use it and then let it automatically retract back. Even small tools dropped from above are serious safety hazards. When working at heights, some of the most commonly used tools […]

Read More

Need To Secure Small Items? Twelve New, Small Tool Retractors From Gear Keeper©.

Fine tune wrist lanyards for maximum worksite safety, increased productivity and ease of use.

Gear Keeper® Modular Wrist Lanyard Systems For Small Hand Tools Offers Many Tethering Options. Gear Keeper’s new retractable and non-retractable wrist lanyard systems for tools up to 5 lbs. are particularly valuable when a short drop length is critical or when […]

Read More

Fine tune wrist lanyards for maximum worksite safety, increased productivity and ease of use.

Gear Keeper® Retractable Tool Lanyard Systems meet IAQG, NAFPI and NCATT Foreign Object Elimination (FOE) standards for securing loose tools

Virtually eliminating a tool left behind, aviation maintenance and repair service employees can use the tool and then let it go as it safely returns to Gear Keeper’s secure tool storage position.  A tool inadvertently left behind during a maintenance […]

Read More

Gear Keeper® Retractable Tool Lanyard Systems meet IAQG, NAFPI and NCATT Foreign Object Elimination (FOE) standards for securing loose tools

Gear Keeper Retractable Smart Phone Keeper

The new Gear Keeper Retractable Smart Phone Keeper keeps your valuable phone from getting lost when in the field. In our technology-driven world today we’re all guilty of passing the time by turning on our smart phones – checking email, […]

Read More

Gear Keeper Retractable Smart Phone Keeper

Unique Gear Keeper® Modular Retractable Lanyard System Offers Thousands of Tethering Options.

FIne tune lanyards for maximum safety, ease of use and security. Apart from the inconvenience of having to interrupt work to retrieve or replace a dropped tool, there is an extraordinarily serious risk of injury or damage.  Think about this; […]

Read More

Unique Gear Keeper® Modular Retractable Lanyard System Offers Thousands of Tethering Options.

Increase Security and Save Money with Customized Gear Keeper© Super Badge Retractor

As a critical component of corporate security, it’s important that employees are able to easily locate and present their personal security badges. But how your employees secure their security card is equally critical. Unfortunately, most commonly used badge retractors won’t […]

Read More

Increase Security and Save Money with Customized Gear Keeper© Super Badge Retractor

EMS-DESIGNED GLASS KEEPER® PROVIDES GLASS-FREE ACCESS TO CAR ACCIDENT VICTIMS IN LESS THAN 45 SECONDS

Every year in the United States over half a million victims require extraction from their vehicles. To maximize survival and minimize additional injury, it is critical that the injured be removed as quickly and as safely as possible. When the […]

Read More

EMS-DESIGNED GLASS KEEPER® PROVIDES GLASS-FREE ACCESS TO CAR ACCIDENT VICTIMS IN LESS THAN 45 SECONDS

New Gear Keeper Webbing Belt with Factory-Mounted Retractable Lanyard System Offers Full Range Of Motion For Tools And Instruments

Webbing belt/retractable safety lanyard for tools and instruments from 3 to 68 oz. The 2-Axis retractor series permits 360° rotation on the belt as well as 180° swing-away from the body for full-range of motion accessibility. In addition, because of […]

Read More

New Gear Keeper Webbing Belt with Factory-Mounted Retractable Lanyard System Offers Full Range Of Motion For Tools And Instruments

Free “Safety Engineer’s Guide to Tool and Instrument Tethering”

New 12-page guide includes sections on How to Select the Proper Tether or Retractable Lanyard, Tool and Instrument Tethers and Custom Tethers as well as tethers for hard hats to security cards. Injury, damage and lost work hours resulting from […]

Read More

Free “Safety Engineer’s Guide to Tool and Instrument Tethering”

When Working in Close Quarters Or Climbing – New Retractable Tether Minimizes Entanglement By Keeping Tools Close At Hand.

Gear Keeper© Retractable Tool Tether Offers Full Range of Motion. Gear Keeper’s new RT3-5601 retractable tether, for tools up to two pounds, is particularly valuable when working in close quarters or climbing. Available in high visibility orange, the retractable tether’s […]

Read More

When Working in Close Quarters Or Climbing – New Retractable Tether Minimizes Entanglement By Keeping Tools Close At Hand.

New Gear Keeper RT3-5602 Retractable Tether Keeps Trowel Safe and At Hand.

When a employee working aloft accidentally drops a trowel a serious work site incident can be set in motion. If the trowel is dropped from just 30 feet, it will hit the ground in less than 2 seconds. Aside from […]

Read More

New Gear Keeper RT3-5602 Retractable Tether Keeps Trowel Safe and At Hand.

New Anchored Tool Tethers Can Save Lives

New From Gear Keeper – 15-25-Pound Anchored Tethers Provide Safety and Security for Construction and Field Force Workers Hammerhead Industries, manufacturers of Gear Keeper industrial tool tethering systems, today announced a pair of new tool tethers for heavy tools and […]

Read More

New Anchored Tool Tethers Can Save Lives

Selecting The Proper Personal Tool Tether or Lanyard… Reprinted from ASSE publication PROFESSIONAL SAFETY’S “BEST PRACTICES”

Reduce Injuries, Damage & Lost Work Time. Objects dropped from above were the fourth leading cause of industrial accidents and a $5.6 billion cost to industry. A significant workplace safety issue is attracting quite a bit of attention: tools and […]

Read More

Selecting The Proper Personal Tool Tether or Lanyard… Reprinted from  ASSE publication PROFESSIONAL SAFETY’S  “BEST PRACTICES”

The common lanyard-type tool tether is not a one-size-fits-all solution.

With such a high risk to workers’ safety, it’s unfortunate that very little has been published on the subject of tethering equipment and tethering safety techniques. Many safety professionals may not be aware of the range of options available to […]

Read More

The common lanyard-type tool tether is not a one-size-fits-all solution.

Three Tethers That Make Working Aloft Safer and More Productive.

Gear Keeper© Tool & Instrument Tethering Systems let safety engineers choose the proper configuration for every application. The common lanyard-type tool tether is not a one-size-fits-all solution. With such a high risk to workers’ safety, it’s unfortunate that very little […]

Read More

Three Tethers That Make Working Aloft Safer and More Productive.

New Gear Keeper® Personal Heavy Tool Tether’S Rugged, Non-Conductive Design Ideal for Power, Phone and Construction Workers

Gear Keeper® has made a name for itself with innovative, retractable gear attachment systems that keep important items safely tethered and close at hand.  Now it has introduced a new personal heavy tool tether designed to keep drills, power drivers, […]

Read More

New Gear Keeper® Personal Heavy Tool Tether’S Rugged, Non-Conductive Design Ideal for Power, Phone and Construction Workers

Free Gear Keeper® 2019 “Safety Engineer’s Guide to ANSI 121-Compliant Tool Tethering

New 16-page guide includes sections on how to select the appropriate tether, how to attach tools that lack attachment points, plus many of the company’s new ergonomic ANSI 121 – Compliant tethering products.

Ventura, Calif.  [May 15, 2019] – The new 2019 safety engineer’s guide contains the industry’s most complete selection of ANSI 121-Compliant, ergonomically designed personal and anchored tool tethers that increase safety and reduce worker fatigue. Over fifty proprietary products, including many new additions are described. The Guide will help the safety engineer find tethers that add convenience to the user and are specifically appropriate for the task and the work environment.

As part of the Company’s ANSI-121-Compliant “Drop Safe Without Slowing You Down” line of products, the new Guide introduces Gear Keeper’s Vest-Mounted Tethers. This low-profile safety system is less obtrusive and cumbersome than bulky coils or cables. Mounted in a vest pocket, it keeps your valuable small gear easily accessible but safe and out of the way. This unique Vest-Mounted tethering system includes a complete range of appropriate tethers for securing the following products: Hard Hat; Pen/Pencil; Smart Phone; Tablet/Large Radio; Tape Measure or Tool Tether; Small Radio tether and a variety of small hand tools.

An illustrated “Selecting Tether Style” reference aids users in choosing the proper ANSI-121 Compliant tether for each type of tool is included in the Guide. The guide also provides information on how even seemingly un-tetherable tools can be safely tethered. This multi-page section contains over 50 demonstration photos of the “Loop, Cinch & Secure” method that illustrate the guide’s tool attachment theories such as Swivel Connection Tools and Attaching Tools With Minimal Geometry.

New ANSI 121 Compliant products are also featured that address difficult workplace considerations such as; tethers for working in confined quarters or climbing; tethers that allow for quick interchangeability of tools and tethers designed to anchor a heavy tool to a structure instead of a person.

To get a copy of the 2019 “Safety Engineer’s Guide to Tool Tethering,” or for more information or bulk discounts of any of the company’s other innovative ANSI121-Compliant tethering products call Customer Service (888) 588-9981. You may also visit www.gearkeeper.com.

          

          

                

Read More

New ANSI 121-Compliant Gear Keeper® retractable tape measure tethers can save a life.

New tape measure safety tethers provide ample extension for arms-length reach.

A few years ago, an un-tethered, 16-ounce tape measure falling from aloft fell on and killed a worker at a New Jersey construction site. This type of accident is now virtually avoidable with the new ANSI 121-Compliant, Gear Keeper Retractable Tape Measure Tether.  A potential lifesaver for this common worksite tool, the new Tape Measure Tethers offers effort-free extension and gentle retraction for safety and convenience.

            Two models are available with a choice of different personal attachment devices. The new Gear Keeper low-profile Retractable Tape Measure Tethers can be worn unobtrusively on a belt or hooked to a D-ring. The model RT4-5615 ($29.00) features a Stainless Steel, rotating Belt Clip Mount that permits a 360o range of motion. When clipped to a belt, workers can safely and easily access and extend the tape measure up to 45” without fear of accidentally dropping the tape measure.

            For those who prefer to clip their tape measure to a D-ring can choose the model RT4-5611 ($29.00) that features a Stainless Steel, locking carabiner mount and extends up to 48”. Both models are also available in 10 packs at $27.00 each. Contact Customer Service for more information. Both models come complete with a disconnectable shock-absorbing lanyard.

            The new Gear Keeper Tape Measure Tethers are suitable for most popular tape measures (up to 20 oz.) that have a lanyard loop attachment. Both models are ANSI 121 compliant with a locking gate/captive eye carabiner or interlocking belt clip. Sufficient for any measuring job, the low retraction force (6 oz.) is designed to eliminate arm strain. When extended, users won’t even know it is safely attached to them. While the tether prevents the tape measure from falling, the low-force retraction lets you gently guide the tape measure back to its secure position.

            For more information about the new Gear Keeper Retractable Tape Measure Tethers — or any of the company’s other innovative tethering products, the full line of Gear Keeper’s tool and instrument tethers, lanyards and accessories call (888) 588-9981. You may also visit www.gearkeeper.com.

                                                                        -30-

Read More

New ANSI-121 compliant Deluxe Side-Release Wrist Lanyard for small hand tools up to 5 lbs.

The Gear Keeper® TL1-2007 offers worksite safety, increased productivity and fast change-out of tools.

Gear Keeper’s new ANSI-121 compliant Deluxe TL1-2007 side release wrist lanyard system for tools up to 5 lbs. are particularly important when a short drop length is critical when climbing or working in close quarters. Unlike an “off-the-shelf” lanyard, which can actually become a safety hazard, all Gear Keeper tethering systems insure dependable ANSI-121 safety and quality by the company’s stringent quality control systems. Quality Assurance includes the company’s dynamic and static testing, drop load testing with up to a 100% safety margin and cycle testing for safe productive use and long-life.

The economical TL1-2007 is attached to the wrist by a loop and cinch Velcro strap and connected to the tool by 10” lanyard with a barrel lock. Productivity is increased by the company’s patented Quick Connect tool attachment connectors that permit secure, fast and easy connection / disconnection of tools. No need to waste time when working with a variety of different tools. Users can quickly change out many tools by simply having extra lanyards attached to the tools and then unclick one tool and click in another. Additional lanyards are inexpensive and are available in 3 and 10 packs. Contact the company at 888.588.9981 for more information.

TL1-2007 side-release wrist tether, including one lanyard loop strap, retails for $12 each (also available in 10/packs $110).  Additional lanyards are available in 3/packs ($14) and 10/packs ($45). The full line of Gear Keeper ANSI-compliant tethers and accessories are available on the company’s website at gearkeeper.com

. A free, 16-page, 2019 edition of the “Safety Engineer’s Guide to Tool Tethering” is available by logging onto gearkeeper.com/guide or by calling Customer Service at 888.588.9981. The new Guide also includes a 4-page section showing how to easily and safely tether tools with and without attachment points as well as related product information.

Read More

42-Inch Anchor Tether Creates Spacious 18-foot Diameter Work Area

Gear Keeper’s proprietary elastic core offers 250% stretch with stress-free extension.

Gear Keeper’s new ergonomically constructed Super Coil anchored tool tethers are manufactured with a low-force polyurethane elastic core that is woven throughout the entire body of the webbing. The result is a tool tether that creates an 18-foot diameter working area but will gently retract to just 42-inches.

The model TL1-4025 is a flexible, low profile coil system that provides an 18-foot working diameter for heavier tools up to 25 pounds.

Designed for tools weighing up to 25lbs, Gear Keeper’s proprietary manufacturing process minimizes “extension” arm fatigue while in use but equally important, minimizes entanglement issues when climbing or working in confined areas. These new Gear Keeper products present compelling safety advantages by offering a significantly longer extension length combined with a shorter retraction length than competitive, ergonomically stiff tethers employing bungee-type cores. Employees will find their work more convenient and will appreciate the significant reduction in arm stress. The ultimate result will be higher employee compliance with your tethering program.

Load tested beyond the drop weight, other safety and strength features of the Super Coil tethers include a lanyard cord that is sewn lengthwise into the webbing to avoid damaging the integrity of the cord and insuring longer durability and strength. Competitive lanyard cords are sewn crosswise creating potential failure points.

The model TL1-4021 specifications include 1” tether webbing and two stainless steel carabiners load rated above 500 kgs (1100 + lbs.) with gates that do not hang up from a side load. It has a retracted length of 42” and extended length of 109”. The model TL-4025 specifications also includes a 1” tether webbing but has one stainless steel carabiner and a fixed web tool attachment loop. It has a retracted length of 50” and an extended length of 109”. Both models are of an adequate length to attach to buckets.

For more information about the new Gear Keeper Tethers — or any of the company’s other innovative tethering products, the full line of Gear Keeper’s tool and instrument tethers, lanyards and accessories call (888) 588-9981. You may also visit www.gearkeeper.com. cgparka cgparka

Read More

Read More

 NBA Jerseys Cheap